Hydrothermal Synthesis Reactor, PTFE Lining, Chemical Industry, Anti-Corrosion and High-Temperature Reactor

• Type: Tank Reactor
• Material: Steel Liner
• Capacity: Customized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: PTFE Products
• Structure: Customized
• Pressure: Positive
• Agitator Model: Customized
• Tower Reactor Type: Customized
• Heating: Customized
• Heat Transfer Structure: Combined
• Automatic Grade: Automatic
• Condition: New
• Transport Package: Wooden Packing
• Specification: Support customization
• Trademark: JSLW
• Origin: China
• HS Code: 39209910
• Production Capacity: 50tons/Month

Product Description

Product Description:
Hydrothermal synthesis reactor:

Brief introduction:
Hydrothermal synthesis reactor is the reactor that provides synthetic chemical substances in certain temperature and pressure conditions.

 Features:
1.It is made of quality non-magnetic0Cr18Ni9Ti of stainless steel.
2.The kettle body and kettle cover are sealed by durable and reliable line seal structure with long-term stability to leak free seal.
3.Stainless steel chassis, stainless steel kettle body, stainless steel gland, stainless steel kettle cover and extended stainless steel rods.
4.With PTFE liner, double care, acid and alkali, resistant to high temperature of 200ºC
5.Thickening processing PTFE cover, not easy to soften.
6.Beautiful appearance, reasonable structure and easy to operate.
7.Good corrosion resistance.

Working Temperature:PTFE≤230°C ,Safe Temperature is 200°C; PTFE≤280°C Safe Temperature is 260°C. Strictly require temperature not to exceed the maximum use temperature.
Working Pressure:The pressure of the actual reactant in the ketle shall not exceed 3Mpa. The pressure generated by material synthesis requires the customer to accurately calculate the pressure generated at the temperature according to the different materials used in the experiment. The experiment must be conducted within the
normal allowable range to ensure the safety of the experimenter.
PTFE Lining and PPL Lining:PPL is a kind of synthetic material added to PTFE, and its properties are better than those of PTFE alone. PPL can be used continuously at 260 °C, with the highest operating temperature 280 °C-300 °C, very low friction coefficient, good wear resistance and excellent chemical stability.
Loading Capacity:The amount of solvent added to the reaction depends on diferent tests, generally 60%~80% of the inner cup capacity. If the reactant produces a large amount of gas, it is recommended to cool overnight and use perchloric acid. Hydrogen peroxide and so on should pay special attention!
Heating Equipment and Safety:Generally, the laboratory uses an oven for heating. The actual temperature control inside the oven should reach±2 °C to avoid excessive overheating.
When the oven starts to heat up, there shall be no personnel in the room to prevent explosion injury! Enter the tank only after it is cooled to room temperature.
Necessary safety protection measures shall be taken when taking the tank, such as face protection, hand protection, respiratory protection, etc.
 

Model	Capacity	Outer diameter of shell	Shell height	Outer diameter of lining	Lining height
LW-25	25ml	45	117	32.8	61
LW-50	50ml	53	140	40	78
LW-100	100ml	62	155	48.7	94
LW-150	150ml	72	189	57.5	114
LW-200	200ml	82	210	62.7	133
LW-250	250ml	82	219	64.9	133
LW-300	300ml	91	226	74	150
LW-500	500ml	104	243	83.5	164
LW-1000	1000ml	146	232	117	150
LW-2000	2000ml	270	220	180	141
Remark	Heating and Cooling Rate ≤5ºC/min
	The above dimensions are in mm

Product Display:

Product Packaging:
Factory And Equipment:
Our Service 
1. Providing technical consultation.
2. Samples are free. 
3.We could customize various products with your brand logo according to your requirements. 
4. Your inquiry will be replied within 1 hours during working time,Within 24 hours when rest time. 
5.Orders will be produced exactly as request and approved samples.
6. Before shipment,our QC will have inspection to make sure the quality. 
7.We always try best to ensure every order to delivery in time. 
8.Special packaging according to request.